DASKM Engineering Industries

+ 919821031129

A/204, Shivshankar Co.op Hsg.Soc.,
Shivshakti Complex, Nr Patri Pool, Kalyan (W),
Thane - 421301.Maharastra INDIA

Globe Valves


• Extended bonnet provided for low temperature and cryogenic services ( cold box and non- cold box
   applications ) to conform to requirement of BS 6364
• Deep stuffing box with lantern ring optional
• Self-aligning two-piece gland
• Gear Box / Chain Wheel design available
• Electric or pneumatic actuator design available
• Locking arrangement optional
• Ring joint Facings available in higher classes
• By-Pass, Drain Plug design available
• Angle and Y-type design available
• Stellited seating hard facing are provided on request
• Alloy-20, Monel, Hastelloy B & C, CF3 & CF3M Materials on request
• We can offer valves under Radiography/ X-ray quality on request


Technical Specification:

Manufacturing Standard BS 1873 / BS : 5352 / API 602
Testing Standard BS 6755 /API 598
Pressure Class 150# to 1500#
Cast Iron IS 210, Gr. FG 200/220/260,
Cast Carbon Steel ASTM 216 Gr. WCB,
Cast Steel ASTM 352, Gr.LCB & LCC
Cast stainless Steel ASTMA 351
Material of Construction CF8/CF3/CF8M/CF3M,
Alloy 20 ASTM A351 Gr. CN7M
Forged Carbon Steel ASTM A 105
Duplex Hastalloy, Alloy-20, Monel
Design Type Bolted Bonnet 0.s. & Y Type
Size Range 1/2" Through 20"
End Connection Flanged Ends, Screwed Ends to NPT/BPT &
Socket Welded to ANSI B16.11
Engineering Operations Hand Wheel Operated, Gear Operated,
Electrical Actuator, Pneumatic Diaphragm


• Petrochemical Industries
• Pharmaceutical Plants
• Oil Industries
• Petroleum Refinery
• Power Plants
• Thermal & Gas
• Fertilizers & Agro Chemicals
• Steel Plant
• Paper Industries
• Cement Industries

Forged Steel Globe Valves

DASKM Engineering Industries valves are available in two bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F316L/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration welded joint is available.

Class 800 A105 to API 602, Trim 13% CR + HFS No. 8, Tested to API 598

Pressure / Temperature Specifications

Maximum Pressure : 136.2 Bar @ 38°C
Temperature : -29°C to 425°C